Hydrawise - Offline Programming | Hunter Industries
Hydrawise - Offline Programming
Offline Programming will allow the controller to run like our traditional controllers, the X-core and the Pro-C models. Each of the six programs (a-f) enables you to start each program up to six times a day, set run lengths, and set specific days to water.
To set up your controller for manual configuration, please follow the steps below:
- From the main menu, click on Settings.
- Select Config.
- Select Factory Default.
- Select Erase Config. This will reset the controller back to factory settings. You will be presented with a warning dialogue.
- Select Configure Offline and begin the wizard steps. Click Ok.
Shortcut steps are available below based on the programming mode.
Standard Mode (Recommended)
| OFFLINE STANDARD MODE |
|---|
| Adjust Time: |
| Enable Wi-Fi: |
| Program Sensor/Check Status: |
| Start Times: |
| Water Days: |
| Zones: |
| Master Valve: |
| Set Seasonal Adjust: |
Advanced Mode
| OFFLINE ADVANCED MODE |
|---|
| Adjust Time: |
| Enable Wi-Fi: |
| Program Sensor/Check Status: |
| Start Times: |
| Water Days: |
| Zones: |
| Master Valve: |
| Set Seasonal Adjust: |